Panasonic KX-NS500 - Simplified Voice Message Access; Other Pbx Extension

Simplified Voice Message Access
Specifies the feature number used to access the SVM feature to record, listen to and delete messages.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
PC Programming Manual References
12.1.8 PBX Configuration-[4-1-8] Extension-Wired Extension-Simplified Voice Message
12.2.6 PBX Configuration-[4-1-6]Extension—Portable Station—Simplified Voice Message
Feature Guide References
2.16.3 Built-in Simplified Voice Message (SVM)
Other PBX Extension
Other PBX extension numbers can be used to easily call extensions connected to PBXs at different locations
in a TIE line network. The leading numbers of all PBXs in the network that will be called should be entered in
this table. A maximum of 16 leading numbers can be programmed.
Dial
Specifies the leading extension number of the other PBX.
Value Range
Max. 3 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
PC Programming Manual References
17.1 PBX Configuration—[9-1] Private Network—TIE Table—
Leading Number
Feature Guide References
4.2.1 TIE Line Service
KX-T7710
The settings of the MESSAGE key and One-touch keys on the KX-T7710 can be programmed.
486 PC Programming Manual
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main