Panasonic KX-NS500 - Line Hunting Order

Line Hunting Order
Specifies the trunk hunting sequence for the trunk group. The hunting sequence can be programmed to start
from the lowest or highest numbered trunks, or to rotate uniformly among all trunks.
Value Range
High -> Low, Low -> High, Rotation
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
Feature Guide References
2.5.5.3 Trunk Access
CO-CO Duration Time (*60s)
Specifies the length of time that a trunk-to-trunk call can be maintained before being disconnected.
Value Range
None, 1–60 (´ 60 s)
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
Feature Guide References
2.11.8 Trunk Call Limitation
Extension-CO Duration Time (*60s)
Specifies the length of time that an extension-to-trunk call can be maintained before being disconnected.
Value Range
None, 1–60 (´ 60 s)
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual 555
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings