16.6 PBX Configuration—[8-6] ARS—Leading
Number Exception
Specifies telephone numbers that will not be connected using the ARS feature. When the user-dialled number
includes a leading number exception, the PBX sends the number to a trunk by the Idle Line Access method if
ARS Mode in 16.1 PBX Configuration—[8-1] ARS—System Setting is "on".
A maximum of 200 different leading number exceptions can be programmed. 20 leading number exception
entries are displayed on the screen at a time. To display other sets, click the applicable tab.
Leading Number Exception
Specifies the leading number exception.
Value Range
Max. 16 digits (consisting of 0–9, *, #, and X)
Maintenance Console Location
16.6 PBX Configuration—[8-6] ARS—Leading Number Exception
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
PC Programming Manual 797
16.6 PBX Configuration—[8-6] ARS—Leading Number Exception
To Next Page
Loading...
