Panasonic KX-NS500 - PBX Configuration-[3-10] Group-P2 P Group

11.10 PBX Configuration—[3-10] Group—P2P Group
Settings for peer-to-peer (P2P) groups can be programmed.
P2P Group Name
Specifies the name of the P2P group.
Value Range
Max. 20 characters
Maintenance Console Location
11.10 PBX Configuration—[3-10] Group—P2P Group
Feature Guide References
5.2.3 Peer-to-Peer (P2P) Connection
Bandwidth Control
Specifies whether to use the bandwidth precedence setting of the P2P group for calling among different P2P
groups.
Value Range
Disable, Enable
Maintenance Console Location
11.10 PBX Configuration—[3-10] Group—P2P Group
Feature Guide References
5.2.3 Peer-to-Peer (P2P) Connection
612 PC Programming Manual
11.10 PBX Configuration—[3-10] Group—P2P Group