2.2 Logout
To logout of Web Maintenance Console, click the button to end the programming session and return to the
Login screen. When this option is chosen, system data is automatically saved from the temporary memory
(DRAM) of the PBX to the System Memory.
To logout
1. Click the button.
A confirmation message will be displayed.
2. Click Yes.
Note
• If the PC running the Web browser that is connected to Web Maintenance Console is shut down, or
the Web browser is closed, any changes that have not been saved to the System Memory will be lost.
To save settings while programming, click the button on the Home screen. Always end your
programming session by clicking the button.
• If you are logged in but do not perform any operations in Web Maintenance Console for 60 minutes
(default value), you will be automatically logged out.
PC Programming Manual 41
2.2 Logout
To Next Page
Loading...
