Panasonic KX-NS500 - Network Service-[2-7] Server Feature-IMAP4

27.2.6 Network Service—[2-7] Server Feature—IMAP4
Settings for IMAP4 server functions for the PBX can be programmed.
IMAP4—IMAP4 server
Specifies whether to enable the IMAP4 server functions of the PBX.
Value Range
Enable, Disable
Maintenance Console Location
27.2.6 Network Service—[2-7] Server Feature—IMAP4
IMAP4—Port number
Specifies a port number for the IMAP server. The default value is 143.
Value Range
143, 1024–65535
Maintenance Console Location
27.2.6 Network Service—[2-7] Server Feature—IMAP4
IMAP4 over SSL—IMAP4 over SSL
Specifies whether to enable SSL encryption for the IMAP4 server functions of the PBX.
Value Range
Enable, Disable
Maintenance Console Location
27.2.6 Network Service—[2-7] Server Feature—IMAP4
IMAP4 over SSL—Port number
Specifies a port number for the IMAP server when using SSL encryption. The default value is 993.
Value Range
993, 1024–65535
Maintenance Console Location
27.2.6 Network Service—[2-7] Server Feature—IMAP4
CAPABILITY command—Supporting IDLE response
Specifies whether the IMAP4 server will respond to IDLE commands sent by clients.
PC Programming Manual 995
27.2.6 Network Service—[2-7] Server Feature—IMAP4