Panasonic KX-NS500 - Host Pbx Access Code

Feature Guide References
2.16.3 Built-in Simplified Voice Message (SVM)
Simplified Voice Message Tone Detection—Cyclic
Enables the disconnection of an SVM-originated trunk-to-trunk call by cyclic signal detection.
Value Range
Disable, Enable
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual References
None
Feature Guide References
2.16.3 Built-in Simplified Voice Message (SVM)
Host PBX Access Code
Group Name
Specifies the name of the trunk group for programming reference.
Value Range
Max. 20 characters
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
Host PBX Access Code 1–10
Specifies the feature number used to access a trunk from the host PBX.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual 559
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings