2.1.4 Easy Setup Wizard
In the Easy Setup Wizard, you will configure the mandatory settings required for the PBX. When you log in to
Web Maintenance Console for a PBX that is in its initialised, factory default state, the Easy Setup Wizard for
that PBX will launch automatically.
You must log in using the Installer level account name and password.
– The Installer level account name is "INSTALLER".
– The default Installer level account password is "1234".
After logging in, the Easy Setup Wizard welcome screen is displayed. Select a language, and then click
Install. Refer to 5.4.1 Easy Setup Wizard in the Installation Manual for detailed and important information
about configuring the PBX using the Easy Setup Wizard.
38 PC Programming Manual
2.1.4 Easy Setup Wizard
To Next Page
Loading...
