15.5 PBX Configuration—[7-5] TRS—Miscellaneous
Toll Restriction (TRS)/Call Barring (Barring) prohibits an extension from making certain trunk calls. The
following optional settings can be programmed to activate a TRS/Barring check, override TRS/Barring, or
switch between TRS/Barring methods.
TRS Override by System Speed Dialling
Enables an outgoing trunk call to override TRS/Barring when the call is made using System Speed Dialling.
Value Range
Disable, Enable
Maintenance Console Location
15.5 PBX Configuration—[7-5] TRS—Miscellaneous
PC Programming Manual References
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
Feature Guide References
2.7.1 Toll Restriction (TRS)/Call Barring (Barring)
TRS Check for Dial " * # "
Enables a TRS/Barring check for the user-dialled " " and "#". This is useful in preventing unauthorised calls
which could possibly be made through certain telephone company exchanges.
Value Range
No Check, Check
Maintenance Console Location
15.5 PBX Configuration—[7-5] TRS—Miscellaneous
Feature Guide References
2.7.1 Toll Restriction (TRS)/Call Barring (Barring)
Mode when Dial Time-out before TRS Check
Selects whether a trunk is disconnected if the TRS/Barring check has not been completed when the trunk
Inter-digit timer expires.
Value Range
Disconnect: The trunk is disconnected as soon as the timer expires.
Keep: The TRS/Barring check is performed when the timer expires.
784 PC Programming Manual
15.5 PBX Configuration—[7-5] TRS—Miscellaneous
To Next Page
Loading...
