19.1 PBX Configuration—[11-1] Maintenance—Main
SMDR
Station Message Detail Recording (SMDR) automatically records detailed information about incoming and
outgoing calls.
SMDR Format—Type
Selects the format of SMDR output.
Value Range
Type A: 80 digits without call charge information
Type B: 80 digits with call charge information
Type C: 120 digits
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Feature Guide References
2.22.1.1 Station Message Detail Recording (SMDR)
SMDR Format—Port
Selects the Serial Interface port that is used to output the SMDR data.
Value Range
None, LAN(TELNET)
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Feature Guide References
2.22.1.1 Station Message Detail Recording (SMDR)
SMDR Format—Page Length (Number of Lines)
Specifies the number of lines on a page of output paper. Match the SMDR output to the paper size being used
in the printer.
Value Range
No Print, 4–99
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
830 PC Programming Manual
19.1 PBX Configuration—[11-1] Maintenance—Main
To Next Page
Loading...
