9.6 PBX Configuration—[1-1]
Configuration—Slot—UM Port Property
The properties of the Unified Messaging (UM) system’s ports can be specified.
Place the mouse cursor over the UM Property button on the Slot screen and click the Port Property button
to open the UM Port Property screen.
The Port for each item is displayed for your reference. For details, see Common Programming Reference
Items in 9.1 PBX Configuration—[1-1] Configuration—Slot
Extension Number
Specifies the extension number of the port.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
9.6 PBX Configuration—[1-1] Configuration—Slot—UM Port Property
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.6 PBX Configuration—[1-1] Configuration—Slot—UM Port Property
PC Programming Manual References
9.1 PBX Configuration—[1-1] Configuration—Slot–To change the status (INS/OUS) of a card (On-line mode
only)
242 PC Programming Manual
9.6 PBX Configuration—[1-1] Configuration—Slot—UM Port Property
To Next Page
Loading...
