CNG Signal Fixation Detection Counter
Specifies the number of times the CNG signal must be detected before the PBX proceeds the fax operation.
Value Range
1–3
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—UM Card Property
CNG Signal Fixation Detection Pattern
Specifies whether or not the Unified Messaging system will respond to CNG signals.
Value Range
OFF, ON
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—UM Card Property
PC Programming Manual 241
9.5 PBX Configuration—[1-1] Configuration—Slot—UM Card Property
To Next Page
Loading...
