Panasonic KX-NS500 - System Control-Program Update

5.1 System Control—Program Update
The programme files for the following hardware components can be updated with the Program Update feature.
Each file must be named as indicated in the table to be recognised by the KX-NS500.
Hardware that can be updated using Program Update
Programme Type Target of Update File Name
MPR Programme KX-NS500 Mother Board PFMPR
Expansion Unit
Programme
KX-NS520 Mother Board PEXPS
LPR Programmes DHLC/DLC PDHLC2
PT Programmes KX-NT265 PNT265A
KX-NT343, KX-NT346, KX-NT343 PNT300
KX-NT321 PNT321
KX-UT133, KX-UT136 PUT13X
KX-UT113, KX-UT123 PUT1XX
KX-NT511 PNT511
KX-NT543, KX-NT546 PNT540
KX-NT551, KX-NT553, KX-NT556 PNT550
KX-NT560 PNT560
KX-UT248 PUT248
KX-UT670 PUT670
Firmware for
KX-NS500
PFPGA PFPGA
PARMIRNR PARMIRNR
PARMVDNR PARMVDNR
PARMIREP PARMIREP
PARMVDEP PARMVDEP
PC300NR PC300NR
PC300EP PC300EP
PC300DAG PC300DAG
CS Programmes CS using a DHLC/DLC card for DECT Portable
Station
PDCSDECT
CS using a DHLC/DLC card for 2.4 GHz Portable
Station
PDCS24G
High-density CS for DECT Portable Station PHCSDECT
IP-CS for DECT Portable Station PICSDCT
64 PC Programming Manual
5.1 System Control—Program Update