6.5 Tool—Import
Allows several types of system data files or tables to be imported.
Except for Speed Dial and Caller ID, this option is only available at Installer level.
The files from which data can be imported are files that were previously saved at this or another PBX using
the Export tool (see 6.6 Tool—Export), or comma-separated value (CSV) files. Unsupported file types cannot
be opened.
For all tables except ARS - Routing Plan, it is possible to edit the CSV file directly using an appropriate editor,
before importing.
The types of data that can be imported using this tool, and the matching destination fields, are as follows:
Feature - Speed Dial and Caller ID
Data Type
Import Destination
System Speed Dialling Number Location
Name Name
CO Line Access Number +
Telephone Number
Dial
CLI Destination CLI Destination
Related programming: 14.1 PBX Configuration—[6-1] Feature—System Speed Dial
Note
Imported Speed Dial and Caller ID data can be copied to a specific speed dial destination. The copy range
can be specified by selecting the from/to of the index.
Incoming Call - DDI/DID Table
Data Type
Import Destination
Location Location
DDI/DID Number Dial In Number
DDI/DID Name Dial In Name
DDI/DID Destination-Day Destination-Day
DDI/DID Destination-Lunch Destination-Lunch
DDI/DID Destination-Break Destination-Break
DDI/DID Destination-Night Destination-Night
Tenant Number Tenant Number
Service Group No. Group number for VPS answer
VM Trunk Group No. VM Trunk Group No.
CLI Ring for DDI/DID-Day CLI Ring - Day
CLI Ring for DDI/DID-Lunch CLI Ring - Lunch
CLI Ring for DDI/DID-Break CLI Ring - Break
CLI Ring for DDI/DID-Night CLI Ring - Night
PC Programming Manual 81
6.5 Tool—Import
To Next Page
Loading...
