7.2.6 Utility—File—Message File Transfer PBX to PC
Transfers Outgoing Message (OGM) files from the System Memory to the PC.
This option is only available at Installer level when programming in On-line mode.
To transfer OGMs to the PC
1. From the lower drop-down list, select the messages to transfer.
• To transfer a certain message, select the number of that message.
• To transfer all messages at once, select "ALL".
The Save dialogue box will be displayed.
2. Enter a file name.
3. Click Save.
4. Click OK.
• When you choose to transfer all messages, each message is saved as an individual file, with a number
appended to the file name corresponding to that message’s location in the System Memory.
• When complete, the display will return to the main screen.
PC Programming Manual 107
7.2.6 Utility—File—Message File Transfer PBX to PC
To Next Page
Loading...
