Panasonic KX-NS500 - UM Configuration-[7] System Security

26.1 UM Configuration—[7] System Security
Manager
Login Failures before Disconnection (1-99 times)
Specifies the number of times an invalid password can be entered, when the System Manager or Message
Manager tries to log in to the system using a telephone, before the call is disconnected.
Value Range
1–99 times
Maintenance Console Location
26.1 UM Configuration—[7] System Security—Manager
System Manager Access from Telephone
Enables or disables access to the Unified Messaging system from the System Manager’s telephone.
Value Range
Disable, Enable
Maintenance Console Location
26.1 UM Configuration—[7] System Security—Manager
Password for System Manager (Up to 16 numeric digits)
If "Enable" is selected in
System Manager Access from Telephone, assign a numerical password here
for the System Manager to login to the system.
Value Range
Max. 16 digits
Maintenance Console Location
26.1 UM Configuration—[7] System Security—Manager
Feature Guide References
3.1.2.7 System Security
Password for System Manager (Message Client)
Specifies the password for the System Manager for accessing the Unified Messaging system from the
messaging client.
Note
This setting requires the installation of an Activation Key for Unified Messaging E-mail Notification
(KX-NSU2xx) for the number of users that will be accessing their UM mailbox using a client software
programme.
972 PC Programming Manual
26.1 UM Configuration—[7] System Security