9.2.3 PBX Configuration—[1-1] Configuration—Slot—System
Property—Slot Summary
Summary information is displayed for all cards installed in the PBX.
Click one of the following tabs to view a summary of the shelf in the PBX:
• Physical Shelf: View the physical card shelf.
• Virtual Shelf: View the virtual card shelf.
Physical Shelf
The Shelf and Slot for each item are displayed for your reference. For details, see Common Programming
Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Card Type
Indicates the service cards installed in the slots of the physical shelf (reference only).
Value Range
Card Type:
LCOT6: 6-Port Analogue Trunk Card
DLC2: 2-Port Digital Extension Card
MCSLC16: 16-Port Single Line Telephone Extension Card
PRI30: PRI30 Card
E1: E1 Trunk Card
DPH2: 2-Port Doorphone Card
DHLC4: 4-Port Digital Hybrid Extension Card
DLC8: 8-Port Digital Extension Card
DLC16: 16-Port Digital Extension Card
MCSLC8: 8-Port Single Line Telephone Extension Card
EXP-M: Expansion Master Card for connecting Expansion units.
Maintenance Console Location
9.2.3 PBX Configuration—[1-1] Configuration—Slot—System Property—Slot Summary
PC Programming Manual References
9.1 PBX Configuration—[1-1] Configuration—Slot
9.21 PBX Configuration—[1-1] Configuration—Slot—Extension—Card Property
9.23 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
9.25 PBX Configuration—[1-1] Configuration—Slot—Card Property - PRI type
Status
Indicates the card status (reference only).
Value Range
INS: The card is in service.
OUS: The card is out of service.
Fault: The card is not communicating with the network.
Pre-Install: A card has been added to the slot.
IDLE: No card is installed in the slot.
PC Programming Manual 219
9.2.3 PBX Configuration—[1-1] Configuration—Slot—System Property—Slot Summary
To Next Page
Loading...
