Installation Type Card Type
Max. No/
Card Type
Max. No/Line
Type
Card Programming
Option - Trunk /
Doorphone Slot
LOCT6: 6-port
Analogue Trunk ports
2
2
(Trunk)
9.23 PBX
Configuration—[1-1]
Configuration—Slot—Card
Property - LCO type
PRI30/E1: PRI30
Trunk Card
1
9.25 PBX
Configuration—[1-1]
Configuration—Slot—Card
Property - PRI type
9.28 PBX
Configuration—[1-1]
Configuration—Slot—Card
Property—E1 type Line
Signal Setting
DPH2: 2-port
Doorphone Interface
Card
1
1
(Doorphone)
9.33 PBX
Configuration—[1-1]
Configuration—Slot
—DOORPHONE
Card—Card Property
Option -
Extension Slot
DHLC4: 4-port Digital
Hybrid Extension Card
2
2
(Extension)
9.21 PBX
Configuration—[1-1]
Configuration—Slot
—Extension—Card
Property
DLC8: 8-port Digital
Extension Card
2
MCSLC8: 8-port SLT
Card
2
DLC16: 16-port Digital
Extension Card
1
1
(Extension)
MCSLC16: 16-port
SLT Card
1
For more information on the virtual cards and other optional cards, see the following sections in the Installation
Manual:
→ 4.4 Virtual Cards
→ 4.5 Physical Trunk and Extension Cards
For information about cards supported by Expansion Units, see System Components for Expansion Unit in the
KX-NS500 Installation Manual.
Common Programming Reference Items
When programming settings for cards, extensions, and other devices using Web Maintenance Console,
depending on the screen being accessed, the following items may be listed on the screen for your reference:
174 PC Programming Manual
9.1 PBX Configuration—[1-1] Configuration—Slot
To Next Page
Loading...
