Panasonic KX-NS500 - PBX Configuration-[2-5] System-Holiday Table

10.5 PBX Configuration—[2-5] System—Holiday
Table
A specific time mode (day, night, lunch, or break) can be selected for operation during holidays. Select the
desired time mode from the Holiday Mode list.
The start and end dates of a maximum of 24 different holidays can be programmed.
You can click the UM Holiday Table tab to open the Holiday Table used for features of the Unified Messaging
system. These settings are synchronised with Unified Messaging system Holiday settings.
Holiday Table—Setting
Enables the setting of the holiday.
Value Range
Disable, Enable
Maintenance Console Location
10.5 PBX Configuration—[2-5] System—Holiday Table
PC Programming Manual References
23.4 UM Configuration—[4-4] Service Settings—Holiday Table—
Setting
Feature Guide References
5.1.4 Time Service
Holiday Table—Start Date—Month
Specifies the month of the holiday start date.
Value Range
1–12
Maintenance Console Location
10.5 PBX Configuration—[2-5] System—Holiday Table
PC Programming Manual References
23.4 UM Configuration—[4-4] Service Settings—Holiday Table— Start Date (Month Day)
Feature Guide References
5.1.4 Time Service
Holiday Table—Start Date—Day
Specifies the day of the holiday start date.
PC Programming Manual 457
10.5 PBX Configuration—[2-5] System—Holiday Table