Panasonic KX-NS500 - Trunk Group Access

PC Programming Manual References
11.1.2 PBX Configuration—[3-1-2] Group—Trunk Group—Local Access Priority
Feature Guide References
2.5.5.3 Trunk Access
Trunk Group Access
Specifies the feature number used to make a trunk call using an idle trunk from a certain trunk group.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
PC Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
TIE Line Access
Specifies the feature number used to make a TIE line call.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
PC Programming Manual References
17.1 PBX Configuration—[9-1] Private Network—TIE Table
Feature Guide References
4.2.1 TIE Line Service
Redial
Specifies the feature number used to redial the last number dialled.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
462 PC Programming Manual
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main