Panasonic KX-NS500 - PBX Configuration-[3-1-4] Group-Trunk Group-Dialling Plan-Auto Assign

11.1.4.1 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling
Plan—Auto Assign
It is possible to assign a set of leading numbers automatically.
Select Auto Assigning Table
Selects the set of preset leading number values to assign to the active dialling plan table. When Type D is
selected, you will be prompted to enter a 3-digit area code, and 7 "X"s, in cells 1 through 47 of the dialling plan
table.
Value Range
Type A:
• 1: N11
• 2: NXX XXXX
• 3: 1NXX NXX XXXX
• 4–50: Not stored
Type B:
• 1: N11
• 2: NNX XXXX
• 3: 1NPX NXX XXXX
• 4–50: Not stored
Type C:
• 1: N11
• 2: NXX XXXX
• 3: 1NNX XXXX
• 4: 1NPX NXX XXXX
• 5–50: Not stored
Type D:
• 1–47: Not stored
• 48: N11
• 49: NXX XXXX
• 50: 1NXX NXX XXXX
Type E:
• 1: N11
• 2: NXX NXX XXXX
• 3: 1NXX NXX XXXX
• 4–50: Not stored
Maintenance Console Location
11.1.4.1 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan—Auto Assign
PC Programming Manual References
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan
570 PC Programming Manual
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan