Panasonic KX-NS500 - Page 1006

NAS Setting—Port No.
Specifies the NAS using port number.
Value Range
445, 1024–65535
Maintenance Console Location
27.4.2 Network Service—[4-2] Other—NAS
NAS Setting—Mount directory
Specifies the NAS mount directory.
Value Range
Max. 128 characters (multi-byte characters allowed)
Maintenance Console Location
27.4.2 Network Service—[4-2] Other—NAS
CIFS Setting—User Name
Specifies the NAS connection user name when NAS Setting—Protocol is set to CIFS.
Value Range
Max. 24 characters (multi-byte characters allowed)
Maintenance Console Location
27.4.2 Network Service—[4-2] Other—NAS
CIFS Setting—Password
Specifies the NAS connection password when NAS Setting—Protocol is set to CIFS.
Value Range
Max. 24 characters (multi-byte characters allowed)
Maintenance Console Location
27.4.2 Network Service—[4-2] Other—NAS
1006 PC Programming Manual
27.4.2 Network Service—[4-2] Other—NAS