V-IPGW
Call Signalling Model
Specifies whether to carry out a call control (H.225) process directly between the cards or through a gatekeeper.
Value Range
Direct, GateKeeper
Maintenance Console Location
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
Gatekeeper Connection Checking Interval (*60s)
Specifies the time between periodic checks of connection to the gatekeeper.
Value Range
0 (disabled), 1–1440
Maintenance Console Location
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
Terminal type to Gatekeeper
Specifies the connection service type notified to the gatekeeper.
Value Range
Terminal, Gateway
Maintenance Console Location
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
Gatekeeper ID to Gatekeeper
Specifies the authentication ID notified to the gatekeeper.
Value Range
Max. 20 Characters
Maintenance Console Location
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
Bandwidth to Gatekeeper
Specifies the used bandwidth information notified to the gatekeeper.
Value Range
1–255 kbps
178 PC Programming Manual
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
To Next Page
Loading...
