UDP Port No. for SIP Extension Server
Specifies the UDP port number used for the SIP Extension server.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
1024–65535
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
CWMP (HTTP) Port No. for SIP-MLT
Specifies the HTTP port of the PBX-side ACS for control communication with KX-UT series SIP phones.
Value Range
0–65535 (Setting "0" will close port access for this feature)
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Feature Guide References
5.2.2.3 Simple Remote Connection
CWMP (HTTPS) Port No. for SIP-MLT
Specifies the HTTPS port of the PBX-side ACS for control communication with KX-UT series SIP phones.
Value Range
0–65535 (Setting "0" will close port access for this feature)
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Feature Guide References
5.2.2.3 Simple Remote Connection
Data Transmission Protocol (HTTP) Port No. for SIP-MLT
Specifies the HTTP port of the PBX-side ACS for data communication with KX-UT series SIP phones.
Value Range
0–65535 (Setting "0" will close port access for this feature)
PC Programming Manual 199
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
To Next Page
Loading...
