Value Range
-38 dBm 0 - -20 dBm 0
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
Silence Detection Rx Threshold
Specifies the silence detection receiving threshold.
Value Range
-38 dBm 0 - -20 dBm 0
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
Maximum Silence Time
Specifies the length of time of silence that the PBX will detect as the end of a call.
Value Range
1000–60000 (ms)
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
Maximum Continuous Tone Time
Specifies the length of time of a continuous tone that the PBX will detect as the end of a call.
Value Range
1000–60000 (ms)
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
Unique Cyclic Tone Detection
Specifies whether the system will detect the end of a call when there is a unique cyclic tone.
Value Range
Disable, Enable
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
PC Programming Manual 227
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
To Next Page
Loading...
