For more details, refer to "5.2 PC Connection—Connection via RMT Card (KX-TDA0196)" or "5.2 PC
Connection—Connection via PRI Card (KX-NS5290CE)" in the Installation Manual.
2. Start the Off-line Web Maintenance launcher :
Analogue Line connection:
1) Click the Connect-Online Mode button.
2) Select the Modem tab.
3) Set the following:
– Dial Number / Dial Type / Port / Baud Rate (bps) / Flow Control / Command
4) Enter the Password.
5) Click the Connect button.
ISDN Line connection:
1) Click the Connect-Online Mode button.
2) Select the ISDN Remote tab.
3) Enter the Telephone Number.
4) Enter the Password.
5) Click the Connect button.
3. The Web Maintenance Console login screen is displayed. For details about logging in, see 2.1.3 Logging
in to Web Maintenance Console.
4. After you successfully log in to Web Maintenance Console, the Home screen will be displayed and
programming can be performed. For details about accessing the different features of Web Maintenance
Console, see 3.1 Home Screen.
Connecting to Web Maintenance Console (Off-line Mode)
To connect to Web Maintenance Console in Off-line mode, use the New -Offline Mode or Open -Offline
Mode operations in the Off-line Web Maintenance Console programme launcher. For details, refer to 1.2.2 PC
Programming Using Off-line Mode.
24 PC Programming Manual
1.2.1 Starting Web Maintenance Console
To Next Page
Loading...
