Panasonic KX-NS500 - Page 248

SIP QoS-ToS Priority
Specifies the priority level in the ToS field when "ToS" is selected in SIP QoS Ability.
Value Range
0–7
Maintenance Console Location
9.8 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
SIP QoS-ToS Type
Specifies the ToS type in the ToS field when "ToS" is selected in SIP QoS Ability.
Value Range
Normal, Monetary Cost, Reliability, Throughput, Delay
Maintenance Console Location
9.8 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
SIP Called Party Number Search Mode
Specifies the search mode for the notified SIP Called Party Number information.
Value Range
Mode 1: Searches SIP accounts only.
Mode 2: Searches SIP accounts, then DDI/DID numbers. Searches the SIP trunks of the tenant of the
search-matched DDI/DID number, in ascending order (Low ® High).
Mode 3: Searches SIP accounts, then DDI/DID numbers. Searches the SIP trunks of the tenant of the
search-matched DDI/DID number, in descending order (High ® Low).
Maintenance Console Location
9.8 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
Timer
SIP T1
Specifies the retransmission interval time for INVITE requests and responses.
Value Range
5–255 ´ 100 ms
Maintenance Console Location
9.8 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
SIP T2
Specifies the retransmission interval time for INVITE responses and non-INVITE requests.
248 PC Programming Manual
9.8 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property