Panasonic KX-NS500 - Page 291

Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property
T309
Specifies the length of time after which the PBX tries to disconnect the data link, before disconnecting the call.
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property
T310
Specifies the maximum time that the PBX waits for a continuance message after receiving the Incoming Call
Proceeding message.
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property
T313
Specifies the maximum time that the PBX waits for a reply after sending the Connect message.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property
T316
Specifies the maximum time that the PBX waits for a reply after sending the Restart message.
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property
PC Programming Manual 291
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property