Panasonic KX-NS500 - Page 300

Maintenance Console Location
9.13 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Card Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
First Resending Time (MGCP)
Specifies the length of time that the PBX waits before starting to resend MGCP (Media Gateway Control
Protocol) data.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
500 ´ n (n=1–8) ms
Maintenance Console Location
9.13 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Card Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Resending Time Out (MGCP)
Specifies the length of time after which the PBX terminates resending MGCP (Media Gateway Control Protocol)
data.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
75–120 s
Maintenance Console Location
9.13 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Card Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Echo Canceller Ability
Specifies the echo canceller ability time.
Note
For KX-NT500 series phones, in place of this setting, the setting for
Echo Cancellation Ability in
9.19 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Card Property—Main is applied.
Value Range
OFF, 64 ms, 128 ms
300 PC Programming Manual
9.13 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Card Property