Panasonic KX-NS500 - Page 317

Fault: The port is not communicating with the network.
Maintenance Console Location
9.16 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT—Port Property
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
Current IP Address
Indicates the current IP address of the SIP Extension (reference only).
Value Range
1.0.0.0–223.255.255.255
Maintenance Console Location
9.16 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT—Port Property
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
P2P Group
Specifies the peer-to-peer group.
Value Range
1–32
Maintenance Console Location
9.16 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT—Port Property
PC Programming Manual References
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site—Main—
P2P Group
Feature Guide References
5.2.3 Peer-to-Peer (P2P) Connection
P2P Group Name
Indicates the selected peer-to-peer group’s name (reference only).
Value Range
P2P Group Name
PC Programming Manual 317
9.16 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT—Port Property