Panasonic KX-NS500 - Page 324

Value Range
272–512
Maintenance Console Location
9.16 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT—Port Property
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
T38 FAX UDPTL Error Correction – Redundancy
Specifies whether to enable the redundancy feature when using the T.38 protocol.
Value Range
Disable, Enable
Maintenance Console Location
9.16 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT—Port Property
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
T38 FAX UDPTL Redundancy count for T.30 messages
Specifies the redundancy count for T.30 messages when using the T.38 protocol.
Value Range
0–7
Maintenance Console Location
9.16 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT—Port Property
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
T38 FAX UDPTL Redundancy count for data
Specifies the redundancy count for data when using the T.38 protocol.
Value Range
0–3
Maintenance Console Location
9.16 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT—Port Property
324 PC Programming Manual
9.16 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT—Port Property