First Resending Time (MGCP)
Specifies the length of time that the PBX waits before starting to resend MGCP (Media Gateway Control
Protocol) data.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
500 ´ n (n=1–8) ms
Maintenance Console Location
9.17 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Card Property
Resending Time Out (MGCP)
Specifies the length of time after which the PBX terminates resending MGCP (Media Gateway Control Protocol)
data.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
75–120 s
Maintenance Console Location
9.17 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Card Property
Echo Canceller Ability
Specifies the echo canceller ability time.
Value Range
OFF, 64 ms, 128 ms
Maintenance Console Location
9.17 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Card Property
DSP Digital Gain (Down)
Specifies the DSP Digital Gain for the down voice path.
Value Range
-14–6 dB
Maintenance Console Location
9.17 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Card Property
DSP Digital Gain (Up)
Specifies the DSP Digital Gain for the up voice path.
328 PC Programming Manual
9.17 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Card Property
To Next Page
Loading...
