Panasonic KX-NS500 - Page 345

Packet Sampling Time
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms
Maintenance Console Location
9.20 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Port Property
Jitter Buffer - Maximum Delay
Specifies the maximum size of the jitter buffer for voice communications.
Value Range
3–50 ms
Maintenance Console Location
9.20 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Port Property
Jitter Buffer - Minimum Delay
Specifies the minimum size of the jitter buffer for voice communications.
Value Range
1–2 ms
Maintenance Console Location
9.20 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Port Property
Jitter Buffer - Initial Delay
Specifies the initial size of the jitter buffer for voice communications.
Value Range
1–7 ms
Maintenance Console Location
9.20 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Port Property
Gain Type
Specifies the type of gain file to distribute to connected SIP devices.
Value Range
Default, Type1, Type2, Type3
PC Programming Manual 345
9.20 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Port Property