Headset OFF/ON
Turns on or off the use of a headset with a DPT. This setting is only available when Port Type on this screen
is set to DPT, DPT (S-DPT), S-Hybrid, or S-Hybrid (S-DPT).
Value Range
Headset OFF, Headset ON
Maintenance Console Location
9.22 PBX Configuration—[1-1] Configuration—Slot—Extension—Port Property
Feature Guide References
2.11.4 Headset Operation
C.Waiting with Headset
Selects the Call Waiting tone generating device when using a headset. This setting is only available when Port
Type on this screen is set to DPT, DPT (S-DPT), S-Hybrid, or S-Hybrid (S-DPT). This setting is displayed when
“Headset ON” is selected for Headset OFF/ON.
Value Range
PT Tone, Headset
Maintenance Console Location
9.22 PBX Configuration—[1-1] Configuration—Slot—Extension—Port Property
Ringing Tone
Selects the dual-tone switching pattern of the ring tone for incoming calls when Port Type on this screen is set
to DPT, DPT (S-DPT), S-Hybrid, S-Hybrid (SLT), or S-Hybrid (S-DPT). This setting is not available for the
APTs, or SLTs.
Value Range
A: 64 ms (697 Hz), 64 ms (852 Hz)
B: 32 ms (697 Hz), 32 ms (852 Hz)
C: 128 ms (697 Hz), 128 ms (852 Hz)
D: 32 ms (697 Hz), 96 ms (852 Hz)
Maintenance Console Location
9.22 PBX Configuration—[1-1] Configuration—Slot—Extension—Port Property
PC Programming Manual 357
9.22 PBX Configuration—[1-1] Configuration—Slot—Extension—Port Property
To Next Page
Loading...
