Panasonic KX-NS500 - Page 365

Caller ID—Caller ID (DTMF) End Code
Selects the DTMF code used to detect the end of a Caller ID series.
Value Range
None, *, #, A, B, C, D
Maintenance Console Location
9.23 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Caller ID (DTMF) Information Code-PRIVATE, OUT OF AREA,
TECHNICAL REASON, UNKNOWN NUMBER, RESTRICTED NUMBER
Specifies the number used to identify each type of information code.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
9.23 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Caller ID Header[03]
Selects the type of the 3rd header in a Caller ID signal.
Value Range
DDN, Caller ID
Maintenance Console Location
9.23 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
PC Programming Manual 365
9.23 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type