Answer Detection Timer
Specifies the length of time required by the PBX to recognise the answer signal. This allows the telephone
company to have enough time to accept the dialled digits correctly.
Value Range
32 x n (n=1–255) ms
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type
Seizure ACK Wait Timer
Specifies the length of time that the PBX waits for the seizure ACK signal.
Value Range
0.5 x n (n=1–20) s
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type
LIU Send Option
Indicates the transmitting level (Transmit Pulse Amplitude) of LIU (reference only).
Value Range
Mode 1-Mode 8
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type
LIU Receive Option
Selects the receiving level (Receive Equalisation) of LIU.
Value Range
Automatic, 6 dB, 12 dB, 18 dB, 24 dB
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type
RAI Signal Detection Mode
Selects the RAI signal detection mode.
Value Range
Type1, Type2
PC Programming Manual 391
9.27 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type
To Next Page
Loading...
