Group-A Code Assignment—Set up Speech Path
Specifies the setup speech path code sent to the telephone company.
Value Range
Undefined, 1–15
Maintenance Console Location
9.30 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type MFC-R2 Setting 2
Group-A Code Assignment—(First) Request
Specifies the code used to request the telephone company to send the first digit of an ANI number.
Value Range
Undefined, 1–15
Maintenance Console Location
9.30 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type MFC-R2 Setting 2
Group-A Code Assignment—(N) Request
Specifies the code used to request the telephone company to send the (N)th digit of an ANI number.
Value Range
Undefined, 1–15
Maintenance Console Location
9.30 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type MFC-R2 Setting 2
Group-A Code Assignment—(N-1) Request
Specifies the code used to request the telephone company to send the (N-1)th digit of an ANI number.
Value Range
Undefined, 1–15
Maintenance Console Location
9.30 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type MFC-R2 Setting 2
Group-A Code Assignment—(N-2) Request
Specifies the code used to request the telephone company to send the (N-2)th digit of an ANI number.
Value Range
Undefined, 1–15
402 PC Programming Manual
9.30 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type MFC-R2 Setting 2
To Next Page
Loading...
