Maintenance Console Location
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
Subscriber Number
Specifies the number used as the CLIP number.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
Feature Guide References
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
Channel Type
Selects the channel type.
Value Range
Undefined: Not assigned
DR2: Digital System R2
Maintenance Console Location
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
Feature Guide References
2.29.1 E1 Line Service
Trunk Property
Selects the trunk property of the E&M channel.
Value Range
Public: Use the DIL/DDI/DID method to distribute incoming trunk calls.
Private: Use the TIE line service between two or more PBXs.
Maintenance Console Location
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
Feature Guide References
2.1.1.1 Incoming Trunk Call Features—SUMMARY
4.1.2.1 Integrated Services Digital Network (ISDN)—SUMMARY
4.2.1 TIE Line Service
PC Programming Manual 407
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
To Next Page
Loading...
