Personal Identification Number
Specifies the Personal Identification Number (PIN) of the PBX, used to avoid registering a PS to the wrong
PBX.
Note that the same PIN should be entered at the PS, before the PS is registered to the PBX.
Value Range
4 digits (consisting of 0–9)
Maintenance Console Location
9.34 PBX Configuration—[1-2] Configuration—Portable Station
Feature Guide References
5.2.4.1 Portable Station (PS) Connection
Index
Indicates the PS number (reference only).
Value Range
1–128
Maintenance Console Location
9.34 PBX Configuration—[1-2] Configuration—Portable Station
Feature Guide References
5.2.4.1 Portable Station (PS) Connection
Extension No.
Specifies the extension number of the PS.
In Wireless XDP Parallel Mode, the PS can be used as a sub telephone with a wired main telephone (PT/SLT),
and two of them will share one extension number of the main telephone. However, note that the PS extension
number specified here will not be altered by the extension number of the main telephone even if the PS is in
Wireless XDP Parallel Mode.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
9.34 PBX Configuration—[1-2] Configuration—Portable Station
Feature Guide References
5.2.4.1 Portable Station (PS) Connection
5.2.4.5 Wireless XDP Parallel Mode
416 PC Programming Manual
9.34 PBX Configuration—[1-2] Configuration—Portable Station
To Next Page
Loading...
