Tone Length—Busy Tone / DND Tone (s)
Specifies the length of time that a busy/DND tone is heard when a call is made to an extension in busy status
or DND mode. A reorder tone will be sent when this timer expires. (For a call through DISA, the call will be
disconnected when this timer expires.)
Value Range
1–15 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
2.3.3 Do Not Disturb (DND)
2.10 Busy Line/Busy Party Features
Tone Length—Reorder Tone for PT Handset (s)
Specifies the length of time that a reorder tone is heard when using a PT handset. The PT will return to idle
status when this timer expires.
Value Range
1–15 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
2.5.2 Automatic Extension Release
Tone Length—Reorder Tone for PT Hands-free (s)
Specifies the length of time that a reorder tone is heard from the built-in speaker of a PT in hands-free mode.
The PT will return to idle status when this timer expires. This setting is applied to PSs as well as PTs.
Value Range
1–15 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
2.5.2 Automatic Extension Release
2.11.1 Hands-free Operation
440 PC Programming Manual
10.3 PBX Configuration—[2-3] System—Timers & Counters
To Next Page
Loading...
