Panasonic KX-NS500 - Page 443

DISA—Disconnect Timer after Intercept (s)
Specifies the length of time that an intercepted DISA call rings at the intercept routing destination before being
disconnected.
Value Range
0–60 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Guide References
2.16.1 Direct Inward System Access (DISA)
DISA—CO-to-CO Call Prolong Counter
Specifies the number of times that the caller can prolong a trunk-to-trunk call on a DISA line. (Selecting "0"
enables the caller to prolong the trunk-to-trunk call without restriction.)
Value Range
0–15
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Guide References
2.16.1 Direct Inward System Access (DISA)
DISA—CO-to-CO Call Prolong Time (x60s)
Specifies the length of time that a trunk-to-trunk call on a DISA line is prolonged each time that the caller
prolongs the call. (Selecting "0" prevents the caller from prolonging the trunk-to-trunk call.)
Value Range
60 ´ n (n = 0–7) s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual 443
10.3 PBX Configuration—[2-3] System—Timers & Counters