Feature Guide References
2.10.4 Second Call Notification to Busy Extension
2.10.4.4 Whisper OHCA
Transfer to busy Extension w/o BSS Operation
Enables a transferred call to be queued when the transfer destination is busy.
Value Range
Disable: The call is not transferred. (If the transfer destination has enabled the call waiting notification feature,
it is possible to inform the destination about the call transfer.)
Enable: The transferred call is queued for the time period specified in
Recall—Transfer Recall (s) in
10.3 PBX Configuration—[2-3] System—Timers & Counters.
Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters— Recall—Transfer Recall (s)
Feature Guide References
2.12.1 Call Transfer
Automatic Answer (Caller)
Enables a caller to have calls automatically answered when the destination has set Hands-free Answerback.
Value Range
Disable: Even if the destination has set Hands-free Answerback, the call will not be automatically answered.
Enable: The call will be automatically answered.
Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
Feature Guide References
2.4.4 Hands-free Answerback
Executive
COS Name
Specifies the name of the COS.
Value Range
Max. 20 characters
PC Programming Manual 499
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
To Next Page
Loading...
