Panasonic KX-NS500 - Page 502

Feature Guide References
2.3.2 Call Forwarding (FWD)
PT Programming Mode Level
Specifies the level of authorisation for performing PT programming.
Value Range
Disable: A PT user cannot perform any programming.
PROG Only: A PT user can perform only personal programming.
PROG **/*#: A PT user can perform Administrator level and User level programming.
Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
COS
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main— COS
Feature Guide References
5.5.3 PT Programming
Manager
Specifies the authorisation to use manager features.
Value Range
Disable, Enable
Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main— COS
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main— COS
Feature Guide References
5.1.6 Manager Features
Time Service Switch
Enables manual switching of time modes.
Value Range
Disable, Enable
502 PC Programming Manual
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings