Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.1.3.2 Ring Tone Pattern Selection
PT Operation—Automatic Answer for Call from CO after
Specifies the number of times a PT in Hands-free Answerback mode will ring before a conversation is
established automatically when it receives a call from a trunk.
Value Range
No Ring, 1 Ring, 2 Rings, 3 Rings
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.4.4 Hands-free Answerback
PT Operation—Automatic Hold by ICM / CO / ICD Group Key
Selects whether calls are disconnected or held when an INTERCOM, PDN, CO, or ICD Group button is pressed
while having a conversation.
Value Range
Disable (Disconnect), Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual References
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
Feature Guide References
2.13.1 Call Hold
520 PC Programming Manual
10.9 PBX Configuration—[2-9] System—System Options
To Next Page
Loading...
