Panasonic KX-NS500 - Page 527

Note
When local partitioning is applied, if there are QSIG connections between KX-NS500s, the connected
KX-NS500s are considered to be the same area and restrictions for private lines are removed. Connections
from outside lines of other devices to private lines are restricted under all circumstances. QSIG connections
using PRI adaptors are also restricted.
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual References
7.3.5 Utility—Log—Call Control Log
9.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Main—
Area ID for logical partition
Option 3
Confirmation Tone—Tone 1 : Called by Voice
Enables the PBX to send Confirmation Tone 1. Confirmation Tone 1 is heard from a PT when it receives a call
in voice-calling mode.
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.18.1 Doorphone Call
2.25.2 Confirmation Tone
Confirmation Tone—Tone 2 : Paged / Automatic Answer
Enables the PBX to send Confirmation Tone 2. Confirmation Tone 2 is heard from a PT when it receives a call
in Hands-free Answerback mode, or paging.
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.4.4 Hands-free Answerback
PC Programming Manual 527
10.9 PBX Configuration—[2-9] System—System Options