Panasonic KX-NS500 - Page 539

Built-in Communication Assistant—System status retry counter
Specifies the number of times that the alive check is repeated for First Party Call Control CTI such as
Communication Assistant (CA). When the alive check has been attempted the programmed number times
without success, the PBX assumes that the logical connection with the CTI application software has been lost.
Value Range
0–10
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.26.1 Computer Telephony Integration (CTI)
3rd Party CTI—System status retry interval timer
Specifies the length of time until the alive check is retried when no response is received, for Third Party Call
Control CTI.
Value Range
0–60 s
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.26.1 Computer Telephony Integration (CTI)
3rd Party CTI—System status retry counter
Specifies the number of times that the alive check is repeated for Third Party Call Control CTI. When the alive
check has been attempted the programmed number of times without success, the PBX assumes that the logical
connection with the CTI application software has been lost.
Value Range
0–10
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.26.1 Computer Telephony Integration (CTI)
PC Programming Manual 539
10.9 PBX Configuration—[2-9] System—System Options