The standard buttons are as follows:
Button Function
OK Temporarily implements changes to the system’s memory (DRAM)
and closes the current screen.
Cancel Abandons changes and closes the current screen.
Apply Temporarily implements changes to the system’s memory (DRAM)
and remains on the same screen.
Copying and Pasting Data
Many setting items in Web Maintenance Console can be copied and pasted to other items on the same screen.
When the icon is displayed, clicking it will open a menu where you can specify the copy source and the
paste destinations.
1. On a programming screen, click . The copy window will be displayed.
Note
The
icon may not be displayed for some programming screens.
2. Select the copy source from the Copy From drop-down menu.
3. In Copy To, select one or more paste destinations. Hold down the "Ctrl" key and click to select destinations
one at a time, or hold down the "Shift" key and click to select a range of destinations.
4. In Items, select one or more items to copy from the source selected in Copy From. Hold down the "Ctrl"
key and click to select items one at a time, or hold down the "Shift" key and click to select a range of items.
5. Click Copy. The programming item(s) selected in Items for the copy source specified in Copy From will
be copied to the destination(s) specified in Copy To.
Individual items can also be copied and pasted in a manner similar to other software programmes. Press
"Ctrl"+"c" to copy a highlighted (orange-coloured) programming item entry, select a target cell by pressing the
keyboard arrow keys, and then press "Ctrl"+"v" to paste the copied information to the selected cell.
PC Programming Manual 55
3.1 Home Screen
To Next Page
Loading...
