Panasonic KX-NS500 - Page 557

Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
DISA Tone Detection—Silence
Enables the disconnection of a DISA-originated trunk-to-trunk call by silence detection.
Value Range
Disable, Enable
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual References
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
Feature Guide References
2.16.1 Direct Inward System Access (DISA)
DISA Tone Detection—Continuous
Enables the disconnection of a DISA-originated trunk-to-trunk call by continuous signal detection.
Value Range
Disable, Enable
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual References
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
Feature Guide References
2.16.1 Direct Inward System Access (DISA)
DISA Tone Detection—Cyclic
Enables the disconnection of a DISA-originated trunk-to-trunk call by cyclic signal detection.
PC Programming Manual 557
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings