Feature Guide References
2.21.4 Display Information
Incoming Call Display
Selects which caller information is shown on the first line of the extension’s display.
Value Range
Caller ID Name, CO Line Name, DDI/DID Name
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Feature Guide References
2.21.4 Display Information
Automatic LCD Switch when Start Talking
Enables the first line of the display to show the call duration automatically after answering a trunk call.
Value Range
Disable, Enable
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Feature Guide References
2.21.4 Display Information
Key Pad Tone
Specifies whether key pad tones are heard when dialling.
Value Range
Off, On
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Automatic Answer for CO Call
Enables the extension to answer an incoming trunk call automatically after a certain number of rings without
going off-hook, when Hands-free Answerback has been set on the extension. This setting is only effective
when Forced Automatic Answer on this screen has been set to Off.
PC Programming Manual 647
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
To Next Page
Loading...
