Panasonic KX-NS500 - Page 657

Feature Guide References
2.3.2 Call Forwarding (FWD)
FWD Destination for Call from Extension
Indicates the forwarding destination of incoming intercom calls (reference only).
Value Range
Max. 32 digits (consisting of 0–9, *, #, [ ] [Secret], and P [Pause])
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
PC Programming Manual References
12.1.2 PBX Configuration—[4-1-2] Extension—Wired Extension—FWD/DND
Feature Guide References
2.3.2 Call Forwarding (FWD)
FWD No Answer Time
Specifies the length of time that an incoming call rings at the extension before the call is forwarded.
Value Range
0–120 s
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
PC Programming Manual References
12.1.2 PBX Configuration—[4-1-2] Extension—Wired Extension—FWD/DND
Feature Guide References
2.3.2 Call Forwarding (FWD)
Keep ring after FWD NA to CO
Specifies whether an extension continues to ring after forwarding an incoming call to an outside destination
via FWD N/A or FWD Busy N/A.
Value Range
Disable, Enable
PC Programming Manual 657
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings